Sign up for our newsletter! 
Home News Products Downloads Forum Distributors Store Contact Us
PPE User Forum
January 20, 2018, 09:00:38 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Search Login Register  
Pages: [1]
Author Topic: A few gauges not reading data in dash command..  (Read 549 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline

Posts: 20

View Profile
« on: June 07, 2017, 11:20:50 pm »

2006 silverado 5.3 LM7

I have the GM pids also.

air fuel ratio usually reads N/A. How can I get that to work? After re inputing the static IP when I had trouble connecting that gauge now reads 0.0:1.

I did a forced PID several times.

02 sensor reads fine there.

Map reads fine.
Maf read fine

Lambda reads nothing Just shows a lean/rich screen.

Another is ambient reads N/A. I assume outside temps. I probably dont have thats sensor.

Catalyst.. N/A.. I would say I dont have that sensor too?

Fuel pressure 0 psi.I have a GM fuel tank pressure sensor PID ( GM engine FTP-B) Not sure why I cant read this.
  It would be great to make one of those gauges like catalyst into something useful like trans temps..

Just saying is all..

And suggestions?
Pages: [1]
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.13 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.074 seconds with 20 queries.
Home | News | Products | Downloads | Forum | Distributors | Store | Contact Us
Copyright © 2013 Palmer Performance Engineering, Inc. All Rights Reserved.