Sign up for our newsletter! 
Home News Products Downloads Forum Distributors Store Contact Us
PPE User Forum
November 24, 2017, 01:55:13 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Search Login Register  
Pages: [1]
Author Topic: Dpf monitoring  (Read 594 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline

Posts: 1

View Profile
« on: June 17, 2017, 04:25:06 pm »

I have a Dashcommand with iOS that I have had for several years. I use it frequently​ to read and clear codes using the WLM 327 module. I want to get more into monitoring the  emissions on my 13 Ram 2500 Cummins since,out of the 13 visits for warranty in 3 years, 11 have been emissions related. I cannot locate how to monitor the dpf, SCR, and def systems. Also, how is a permanent code cleared?
Hero Member
Offline Offline

Posts: 2234

View Profile
« Reply #1 on: June 20, 2017, 02:23:37 pm »

Permanent codes will self clear after enough cold starts with the problem resolved, you cannot manually clear them.

I think a lot of what you want to monitor isn't part of the standard OBD-II spec, or if it is your vehicle doesn't support the standard OBD-II PIDs for that data. You should be able to monitor any supported data from the Data Grid or Gauges screens.
Pages: [1]
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.13 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.059 seconds with 20 queries.
Home | News | Products | Downloads | Forum | Distributors | Store | Contact Us
Copyright © 2013 Palmer Performance Engineering, Inc. All Rights Reserved.