PIE WEDGE

PPE User Forum

June 19, 2013, 04:24:35 pm

Welcome, Guest. Please login or register.

Home

Help

PPE User Forum > DashXL > DashXL Discussion > PIE WEDGE

Pages: [1]

« previous next »

	Author	Topic: PIE WEDGE (Read 2137 times)
0 Members and 1 Guest are viewing this topic.

metalchips2

Newbie

Offline

Posts: 23

PIE WEDGE

« on: July 10, 2009, 06:00:01 am »

IS IT POSSIBLE TO MAKE A TACH GAUGE WITH THE RPM FROM 90 DEG TO 180 DEG WITH THIS PROGRAM?
THANKS FOR ANY HELP!


	Logged

bengteck

Full Member

Offline

Posts: 101

TypeRR HCHII

Re: PIE WEDGE

« Reply #1 on: July 10, 2009, 06:31:10 am »

frankly i do not understand your question, you meant beyond 180 deg instead?

or if you wish to restrict the needle movement within 90-180deg
you can simply change the start point fm 0 to 90deg and end at 180deg

hope i catch where you're heading


	Logged

BengTeck - Honda Civic Hybrid 2007
Kohjinsha UMPC 500MHz AMD Geode LX800 @ 1GB Ram
ElmScan 5 c/w External BlueTooth & ScanXL Pro v3.2.0 (Build 1692) & Dash Command v2.5.0 (Build 1692)

metalchips2

Newbie

Offline

Posts: 23

Re: PIE WEDGE

« Reply #2 on: July 10, 2009, 01:30:20 pm »

I AM TRYING TO PUT THE TICKS IN THE CORRECT PLACE IN A WEDGE
GAUGE
THANKS FOR YOUR HELP IN ADVANCE


	Logged

bengteck

Full Member

Offline

Posts: 101

TypeRR HCHII

Re: PIE WEDGE

« Reply #3 on: July 12, 2009, 09:25:41 am »

find under circular tick on your selected tick mark
change under angle and sweep to 180

play around to understand better


	Logged

BengTeck - Honda Civic Hybrid 2007
Kohjinsha UMPC 500MHz AMD Geode LX800 @ 1GB Ram
ElmScan 5 c/w External BlueTooth & ScanXL Pro v3.2.0 (Build 1692) & Dash Command v2.5.0 (Build 1692)

metalchips2

Newbie

Offline

Posts: 23

Re: PIE WEDGE

« Reply #4 on: July 13, 2009, 05:15:32 am »

:)THANKS FOR THE HELP, I PLAYED AROUND UNTIL I GOT THIS RIGHT Cool


	Logged

Pages: [1]

« previous next »

Page created in 0.101 seconds with 20 queries.