Sign up for our newsletter! 
Home News Products Downloads Forum Distributors Store Contact Us
PPE User Forum
December 14, 2017, 07:22:06 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: 97 Camry SAE.RPM 0rpm???  (Read 4094 times)
0 Members and 1 Guest are viewing this topic.
97camry
Newbie
*
Offline Offline

Posts: 3


View Profile
« on: September 09, 2009, 05:56:51 pm »

Hi All

I installed scanXL on my laptop try to connect my 97 camry. The connection looks good and validation PID looks fine. But the engine rpm always show 0rpm... I don't know why...

Please help
Logged
97camry
Newbie
*
Offline Offline

Posts: 3


View Profile
« Reply #1 on: September 09, 2009, 06:00:12 pm »

I tried the software which I download from http://www.edgeanalysis.com/download.asp and it works fine. As far as I turn the ignition on, the value shows on the screen. So I think that's not the elm327 problem. Is there special setting on SCANXL?
Logged
BrianP
Administrator
Hero Member
*****
Offline Offline

Posts: 1314


View Profile
« Reply #2 on: September 09, 2009, 10:05:25 pm »

Did you make sure to select SAE.RPM for data logging (on the PID Config tab) and then start data logging? Data logging is not automatically started as soon as you connect to the vehicle.
Logged
97camry
Newbie
*
Offline Offline

Posts: 3


View Profile
« Reply #3 on: September 10, 2009, 05:29:49 am »

yes, I did. Doesn't matter the monitor on or off. rpm and other shows 0. I tried ScanMaster ELM and I noticed the different is the com port speed. ScanXL use 115200 and the ScanMaster tried 38400 failed and try 9600 and detected the elm. I think there is no way to change the com port speed in ScanXL....

I am using ELM327 USB
Logged
Weston@PPE
Administrator
Hero Member
*****
Offline Offline

Posts: 2234


View Profile
« Reply #4 on: September 11, 2009, 05:20:16 pm »

Could you send a tech log of this to support@palmerperformance.com?

To get a tech log, go to the Help menu > Debug Options, and set Debug Level 9. Now connect to the vehicle and recreate the problem. After you have monitored some data go back to Debug Options, and select Save Tech Log.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.13 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.063 seconds with 20 queries.
Home | News | Products | Downloads | Forum | Distributors | Store | Contact Us
Copyright © 2013 Palmer Performance Engineering, Inc. All Rights Reserved.