Sign up for our newsletter! 
Home News Products Downloads Forum Distributors Store Contact Us
PPE User Forum
January 19, 2018, 06:15:53 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Search Login Register  
Pages: [1]
Author Topic: Scan XL Pro Dash  (Read 2415 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline

Posts: 5

View Profile
« on: September 27, 2011, 01:20:02 pm »

hey all,
using scan xl pro, i am not seeing the afr/lambda on the dash, but the graphs after data recording showed the o2sensors voltages. how do i turn on the dash view afr/lambda?
Hero Member
Offline Offline

Posts: 2234

View Profile
« Reply #1 on: October 18, 2011, 08:26:08 pm »

It sounds like your vehicle doesn't report lambda through the standardized OBD-II PIDs.

Calculating lambda off of O2 voltage would be difficult at best. If you don't have a wideband O2 sensor, it would be near impossible since they are intended to sway between 0.2 and 0.8 (or similar numbers) numerous times a second.
Pages: [1]
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.13 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.045 seconds with 20 queries.
Home | News | Products | Downloads | Forum | Distributors | Store | Contact Us
Copyright © 2013 Palmer Performance Engineering, Inc. All Rights Reserved.