|
SSV366
|
 |
« on: March 17, 2012, 08:31:46 pm » |
|
Hi I just purchased dash command for my iPad 3 and it isn't working properly, the touch points for the icons don't work and if they do it brings up the wrong selection then when you press the screen to bring up the options to go back to menu and all that I've pressed everywhere on the screen and nothing happens, please help?
It works fine on my iPhone 4s though.
|
|
|
|
|
Logged
|
|
|
|
|
John@PPE
|
|
« Reply #1 on: March 19, 2012, 10:52:52 am » |
|
We've just tested DashCommand on the iPad 3 and yes, it is totally broken.
The good news is that we've been working on some unrelated changes, that will make DashCommand work on the iPad 3.
The bad news is that DashCommand on iPad 3, even with our changes, is not nearly as fast as iPad2.
We have added better iPad3 support to our TODO list.
|
|
|
|
|
Logged
|
|
|
|
|
torhak01
|
|
« Reply #2 on: March 29, 2012, 10:45:10 pm » |
|
Just want to say that I have the same problem.
|
|
|
|
|
Logged
|
|
|
|
|
Cody@PPE
|
|
« Reply #3 on: March 30, 2012, 12:06:20 pm » |
|
We will have the updated version with the fix out soon.
|
|
|
|
|
Logged
|
|
|
|
|
torhak01
|
|
« Reply #4 on: March 31, 2012, 09:46:08 am » |
|
Great!
Thank You!
|
|
|
|
|
Logged
|
|
|
|
|
RennGent
|
|
« Reply #5 on: April 19, 2012, 08:09:47 pm » |
|
Still hasn't been updated for iPad (3rd generation). App is useless for the new iPad. Can not tap on icons, menus do not work, tap locations are horribly off. This is a warning for anyone with the new iPad!
I'm looking forward to an update soon. Hopefully it will include retina support, but I'll take even basic functionality for now.
|
|
|
|
|
Logged
|
|
|
|
|
Weston@PPE
|
|
« Reply #6 on: April 20, 2012, 10:40:29 am » |
|
We have made quite a few changes that should help with the new iPad, and we're hoping to have a release out soon. Please be patient!
|
|
|
|
|
Logged
|
|
|
|
|
bschweig
|
|
« Reply #7 on: April 22, 2012, 01:09:31 pm » |
|
Can you please give a more exact date when this support will be added?
Thank you
|
|
|
|
|
Logged
|
|
|
|
|
John@PPE
|
|
« Reply #8 on: April 23, 2012, 07:57:49 am » |
|
Not exactly. We had thought we'd have already released it. But it is getting held up as we wait on some of our hardware partners. We apologize that it is taking so long.
|
|
|
|
|
Logged
|
|
|
|
|
RennGent
|
|
« Reply #9 on: April 23, 2012, 05:10:56 pm » |
|
Not exactly. We had thought we'd have already released it. But it is getting held up as we wait on some of our hardware partners. We apologize that it is taking so long.
Sounds great, looking forward to it! |
|
|
|
|
Logged
|
|
|
|
|
bschweig
|
|
« Reply #10 on: April 23, 2012, 07:35:29 pm » |
|
Not exactly. We had thought we'd have already released it. But it is getting held up as we wait on some of our hardware partners. We apologize that it is taking so long.
How is hardware relevant to this? I have a plx kiwi wifi +imfd that has just arrived... Is this hardware now incompatible with a ipad3 / your revised software? Can you please clarify this and please at least give an estimate of when your revision will be out? Also, if I purchase the current version of DC and run it on my iphone4s I assume that when the ipad3 update comes out the same app will run on the iPhone 4s and the new iPad? Thanks! |
|
|
|
|
Logged
|
|
|
|
|
John@PPE
|
|
« Reply #11 on: April 23, 2012, 07:52:48 pm » |
|
Our hardware partner issues are unrelated to the iPad3. The same app as runs on the iPhone 4s will run on the new iPad. Your PLX Kiwi will also work with the iPad 3.
I'm not authorized to give an estimate, but I am guessing that in the next 7 days we will have it out. Maybe 14 tops.
|
|
|
|
|
Logged
|
|
|
|
|
|
|
Golf 5 R32dsg
|
|
« Reply #13 on: April 26, 2012, 09:37:28 am » |
|
Harrys laptimer trainer works perfectly and the update for the iPad3 is already finished for a while and it works and looks amazingly!!!
The only downside, it has no readouts from the engine, exept the rpm and gears.
We have waited really long enough now...really!
Give some trotthle Palmer Performance!
Thank you!
|
|
|
|
|
Logged
|
|
|
|
|
Golf 5 R32dsg
|
|
« Reply #14 on: April 26, 2012, 09:48:09 am » |
|
We've just tested DashCommand on the iPad 3 and yes, it is totally broken.
The good news is that we've been working on some unrelated changes, that will make DashCommand work on the iPad 3.
The bad news is that DashCommand on iPad 3, even with our changes, is not nearly as fast as iPad2.
We have added better iPad3 support to our TODO list.
What do you mean by "not so fast"...is there a massive lag in datatransfer from the obd-device or is the working from the program slower. If i read this correctly, the iPad3 users are having purchased bad software...i hope that there will soon be an update that it works firstly and second it works better on the new iPad. Almost 40 euros down the drain pffff  |
|
|
|
|
Logged
|
|
|
|
|
