Kiwi Wifi Problems

[snapmech]

When using my kiwi wifi with scanxl pro, i cannot get my gauges or graphs or anything to work. I believe I have everything setup correctly because it shows  that it is connected to both the scan tool and the vehicle. Is there only certain pids you can get when using the kiwi? Thanks for the help! Sorry if im ignorant of anything lol.

[snapmech]

Bump

[Weston@PPE]

Try the Data Logging view, that should give you a list of all the PIDs you have currently selected. You need to start data monitoring/logging before you will be able to see any data. You can do this by pushing the little colored circles at the bottom of the screen, or you can go to the Logging menu > Start Monitoring.

The difference between monitoring and logging, is logging records the data (REQUIRED for graphs to work) and monitoring drops the old data when it gets new data.

[snapmech]

Ok i tried that and the values are not changing while im logging. Is there a guide to settting it up for kiwi wife, so i can verify all my connection settings in windows 7? Thanks 

[snapmech]

Bump

[Cody@PPE]

Your problem is an odd one.  Could you send a Techlog of a PID validation to Support@palmerperformance.com?

You would need to connect, then Help>Debug Options>Debug level 9.  Then go to Settings>PID Config and click on Validate PIDs at the top, chose an aggressive validation.  When it has finished go to Help>Debug Options>Save Tech Log, then Email that log with a small message reminding us of this thread.