conection failed, wifi not found

[Nederlines]

Hi, I have problems with the wifi, I can not connect the device with the program plx kiwi dashcommand in vesion 3.0.1, this happens to me since I updated my iphone to version 5.1.1
everything worked perfect when my IOS version was 4.3.3 and used the dashcommand 2.7 ..

you can help me solve this problem? thnks

[John@PPE]

Did you follow the steps in the wifi setup guide? http://www.palmerperformance.com/download/docs/DashCommand_WiFi_Setup_Guide.pdf

You had it working before, so maybe these settings were reset?

[Nederlines]

Hi John, I comment, I confirm that my wifi is CLKdevice model, but 100% compatible with dashcommand, according to the characteristics of the device. Tomorrow will check following the guidance you have provided me. I will also try using the parameters and instructions home gives me the OBD2 CLKdevice.
I'll leave the instructions of my OBD2 wifi and see if you can help to clear the fault. thanks

[Nederlines]

 
Hi, I solved the connection problem, I followed the steps recommended instructions CLKdevice wifi. It's finally fixed. I wonder how to set up, the characteristics of Dashcommand for my type of OBD2 wifi, so that the transfer rate is maximized. Best regards and many thanks.

[John@PPE]

Great! Glad to hear that it is working.

DashCommand is already configured to run optimally with your CLK. You shouldn't need to adjust any settings.

[Nederlines]

Please show me the correct setup, because I believe that I modified for testing. Thank you.

[Nederlines]

ISO/KWP 3000
OBD2  200

this correct?

[John@PPE]

Yes. Those values are correct.

[Nederlines]

ok thanks..