Sign up for our newsletter! 
Home News Products Downloads Forum Distributors Store Contact Us
PPE User Forum
December 13, 2017, 11:41:36 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Search Login Register  
Pages: [1]
Author Topic: mixed ISO, PWM and Canbus with scanXL  (Read 6337 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline

Posts: 9

View Profile
« on: February 28, 2008, 07:25:18 am »

Brian P,

I use an elm327 with PCMSCAN on a Ford 2005 fiesta, Ford 2004 focus and MG 2004 ZR. All cars are equiped with ISO for the ABS and SRS ecus while the fiesta PCM is canbus 11 bit and the Focus PCM is PWM. Will the ford enhanced scanXL software read all modules in the ford cars even if they are using different protocols?

What is the cost to upgrade from PCMSCAN to the ford enhanced scanXL?   
Hero Member
Offline Offline

Posts: 1314

View Profile
« Reply #1 on: February 28, 2008, 11:31:18 am »

Yes, our Ford enhanced diagnostics add-on supports all the protocols you've listed. However, we don't currently have European Ford models listed. So you will have to choose the closest US model vehicle. But the diagnostic support should work just fine.

For pricing, please see our online store.
Pages: [1]
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.13 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.066 seconds with 20 queries.
Home | News | Products | Downloads | Forum | Distributors | Store | Contact Us
Copyright © 2013 Palmer Performance Engineering, Inc. All Rights Reserved.