Sign up for our newsletter! 
Home News Products Downloads Forum Distributors Store Contact Us
PPE User Forum
December 15, 2017, 12:24:12 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: Data Grid question  (Read 1659 times)
0 Members and 1 Guest are viewing this topic.
97tahoe
Newbie
*
Offline Offline

Posts: 4


View Profile
« on: April 07, 2015, 01:03:24 am »

In the data grid view what do the arrows pointing up and down on the right after each PID mean? And what does the symbol above the arrows mean that has an x with a dash above it.  I assume that means average?

thanks
Logged
Weston@PPE
Administrator
Hero Member
*****
Offline Offline

Posts: 2234


View Profile
« Reply #1 on: April 07, 2015, 12:51:48 pm »

Those are for min, max, and average.
Logged
97tahoe
Newbie
*
Offline Offline

Posts: 4


View Profile
« Reply #2 on: April 07, 2015, 06:34:45 pm »

Ok i'm looking at knock sensor count activity mainly.  How can i know the total number of counts?  So the number that comes up on the left is the amount that just happened? then that number goes away and gets transferred to the right side under the min/max averages?
Logged
John@PPE
Hero Member
*****
Offline Offline

Posts: 3029


View Profile
« Reply #3 on: April 10, 2015, 11:04:56 am »

The count sensors work in two ways. One sensor reports simply that the engine is knocking. This will read 0 or 1.

The second sensor reports degrees of knock. For example if the knock is 3, then that means you have 3 times too much timing/spark advance.

There is no knock sensor that will report total number of counts.
Logged
97tahoe
Newbie
*
Offline Offline

Posts: 4


View Profile
« Reply #4 on: April 11, 2015, 07:28:38 pm »

I'm reading 170 on the left and the numbers on the right read X= 107 and ^245

Logged
John@PPE
Hero Member
*****
Offline Offline

Posts: 3029


View Profile
« Reply #5 on: April 12, 2015, 01:12:17 am »

Which PID is it, exactly?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.13 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.062 seconds with 20 queries.
Home | News | Products | Downloads | Forum | Distributors | Store | Contact Us
Copyright © 2013 Palmer Performance Engineering, Inc. All Rights Reserved.