Sign up for our newsletter! 
Home News Products Downloads Forum Distributors Store Contact Us
PPE User Forum
December 18, 2017, 03:40:28 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: discovery TD5 ii  (Read 5512 times)
0 Members and 1 Guest are viewing this topic.
limited cv8r
Newbie
*
Offline Offline

Posts: 8


View Profile
« on: July 19, 2008, 01:47:42 am »

Tried to connect to an Australian 2001 TD5 series 2 with a drewtech mongoose cable. Scan XL would connect to the vehicle but would only show the tranny computer as $18. Is there any way to detect or connect to the engine ECM.
Logged
BrianP
Administrator
Hero Member
*****
Offline Offline

Posts: 1314


View Profile
« Reply #1 on: July 28, 2008, 11:29:21 pm »

You could try creating a new configuration file and see if it detects it next time you connect. Are you sure your vehicle has a separate engine controller? It could be that it has a single powertrain controller that is using a transmission address.
Logged
limited cv8r
Newbie
*
Offline Offline

Posts: 8


View Profile
« Reply #2 on: August 13, 2008, 06:49:31 am »

tried again with new configuration, no difference, still only shows trans $18. I'm fairly sure this has an ECM, TCM & BCM, ABS as well.validated PIDs with aggressive option, went from 26 to 33 available,alot were showing as unsupported in the data page. tried logging, only valid data was RPM,TPS & Load%, it also seemed to be logging at a slow data rate.Any other suggestions.
Logged
BrianP
Administrator
Hero Member
*****
Offline Offline

Posts: 1314


View Profile
« Reply #3 on: August 19, 2008, 10:40:49 pm »

Do you know if any of these other controllers are using OBD-II protocols? Or are they on some other non-OBD protocol?
Logged
limited cv8r
Newbie
*
Offline Offline

Posts: 8


View Profile
« Reply #4 on: August 22, 2008, 08:18:25 am »

This is a diesel 4wd so it may even comply to EOBD, could the lack of communication be because EOBD standard was not implemented until later than 2001,  03-04?
Logged
BrianP
Administrator
Hero Member
*****
Offline Offline

Posts: 1314


View Profile
« Reply #5 on: August 26, 2008, 11:13:12 pm »

That very well could be the problem. Do you have any idea what model year they implemented the OBD standards for diesel engines in your country?
Logged
limited cv8r
Newbie
*
Offline Offline

Posts: 8


View Profile
« Reply #6 on: August 27, 2008, 11:46:14 am »

I'm pretty sure the land rovers are imported into Australia from europe, so it would be whenever it was implemented over there, which I think was around 2004.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.13 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.231 seconds with 20 queries.
Home | News | Products | Downloads | Forum | Distributors | Store | Contact Us
Copyright © 2013 Palmer Performance Engineering, Inc. All Rights Reserved.