Sign up for our newsletter! 
Home News Products Downloads Forum Distributors Store Contact Us
PPE User Forum
December 10, 2017, 10:49:32 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: I'm new, generic question.  (Read 3971 times)
0 Members and 1 Guest are viewing this topic.
stbennet
Newbie
*
Offline Offline

Posts: 4


View Profile
« on: July 27, 2008, 01:34:23 pm »

Is there a list of the generic commands available?  I'm trying to make a custom dash with the Ambient Air Temperature.  I use the PID value SAE.AAT, but when I preview the dash, the value stays at zero? 
Logged
bengteck
Full Member
***
Offline Offline

Posts: 101


TypeRR HCHII


View Profile
« Reply #1 on: July 28, 2008, 09:28:30 pm »

presume you're using ver 2.4.X
you need to go to SETTINGS - PID CONFIG
unselect SHOW ONLY SUPPORTED PIDs - if that was ticked
Click on VALIDATE PIDs - use the slow option
click SELECT ALL
click CHECK

if it still don't come out any reading, confirm your car don't support
Logged

BengTeck - Honda Civic Hybrid 2007
Kohjinsha UMPC 500MHz AMD Geode LX800 @ 1GB Ram
ElmScan 5 c/w External BlueTooth & ScanXL Pro v3.2.0 (Build 1692) & Dash Command v2.5.0 (Build 1692)
stbennet
Newbie
*
Offline Offline

Posts: 4


View Profile
« Reply #2 on: July 28, 2008, 11:10:28 pm »

Thank you.  If I can get the program working again, I'll check that out.  Smiley
Logged
BrianP
Administrator
Hero Member
*****
Offline Offline

Posts: 1314


View Profile
« Reply #3 on: July 28, 2008, 11:46:23 pm »

Yes, just make sure you have that PID selected for data logging (and your vehicle must support it also).

Can you send me a techlog (on level 9) of the problems you are having with the software?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.13 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.103 seconds with 20 queries.
Home | News | Products | Downloads | Forum | Distributors | Store | Contact Us
Copyright © 2013 Palmer Performance Engineering, Inc. All Rights Reserved.