|
PCMSCAN™ Downloads
-
PCMSCAN™ v2.3.0 for Windows 95/98/ME/NT/2K/XP/Vista
- PCMSCAN for Windows is about 16 megabytes in size. Once you download
it, just double-click it to launch the installer.
- Note: You will not be able to use all program features without a license
code. You will only be able to evaluate program functionality, scan and data log the Engine RPM parameter and play
back log files. Click here to purchase PCMSCAN.
What's New
Version 2.3.0, June 29th 2007
- Optimized the log file exporting for really large log files.
- Implemented log file bookmark system (press F6 while recording to add a bookmark).
- Added new alerts feature that allows you to set conditions for custom audible and bookmarked alerts.
- Added two new sample script parameters - instantaneous fuel economy & boost.
Version 2.2.1, May 24th 2007
- Merged ELM and OBD-II response timeout settings into just one setting.
- Added new DashXL feature to maintain dashboard aspect ratio.
- Fixed a communications timeout that was causing problems with Bluetooth devices.
- Fixed bug in the DashXL text horizontal justification calculations.
- Added new text layout method to DashXL.
- Added new script API functionality.
Version 2.2.0, April 22nd 2007
- Don't allow reading/clearing trouble codes while data logging.
- Fixed Innovate LM-1 connectivity problem.
- Fixed problem where the software could crash if data logging for extended periods of time.
- Optimized installer size by removing redundant files.
Version 2.1.2, April 4th 2007
- Added support for oxygen sensor test results.
- Added new plugin system so 3rd party developers can extend the scan tool functionality.
If you would like to develop a plugin, please contact us.
- Added Portuguese language translation.
- Added Italian language translation.
- Fixed connection problem on Win9x computers.
Version 2.1.1, January 31st 2007
- Fixed language packs in the installer.
- Fixed DashXL™ text rendering on Win9x.
- Fixed rare ELM connection problem.
- Added import/export support to PID script editor.
Version 2.1, January 21st 2007
- Added a full screen mode.
- Added support for the Dutch language.
- Fixed bug that caused incorrect conversion from kilograms to pounds.
- Fixed Bluetooth connection bug.
- The dyno graphs can now be displayed in metric units.
- The drag strip time slips can now be displayed in metric units.
- Added printing and image exporting for the Dyno, Drag Strip, and DashXL dashboards.
Version 2.0, December 2nd 2006
- Added all new look and user interface.
- Added a digital dyno.
- Added a drag strip feature, complete with timing lights.
- Introduction of new DashXL technology.
- Implemented support for custom Javascript parameters.
Version 1.5.2, November 14th 2006
- Fixed a bug that caused LC-1 aux. input not to work correctly.
- Fixed more connection problems when using the mOByDic interface.
Version 1.5.1, September 23rd 2006
- Fixed some connection problems when using the mOByDic interface.
- Added new OBD-II timeout option to the preferences.
- Fixed some connection problems when using J2534 (v02.02) interfaces.
Version 1.5.0, August 27th 2006
- Now over 160 generic OBD-II parameters (PID) available.
- Now over 12,000 trouble code descriptions from many different manufacturers.
- Added support for the AEM UEGO wide band O2 meter.
- Added support for the TechEdge wide band O2 meter.
- New data logging engine with support for time stamps for each PID and faster recording.
- New log file format for new logging engine and time stamps. Stores data faster and more effectively.
- The PID time stamp can be exported from the log file export dialog.
- Fixed some connection issues when using the mOByDic interface.
- Better support for vehicles that have multiple ECU's.
Version 1.4.3, March 31st 2006
- Fixed bug that caused the connection to fail when connecting with the Autotap interface.
- Fixed bug that caused log file corruption when saving log files.
- Some existing log files may not be able to be opened as a result.
- Added support for the TempDAQ.
Version 1.4.2, March 5th 2006
- Fixed bug that caused the connection to the ELM to not work properly if the device was configured differently.
- Added support for SAE J2534 (v02.02) devices.
- Fixed library export bug on Windows 95.
- Show which parameters are supported, even if the user is not licensed to use them.
- Fixed bug where you could not load a configuration file you just barely saved.
- Dashboard maps now support range and standard deviation.
Version 1.4.1, February 13th 2006
- The evaluation version is now a fully functional demo version!
- Using the evaluation version you can now scan, log, save, and playback the value of the Engine Speed (SAE.RPM) parameter.
- OBD Compliance is now reported on a per ECU basis.
- Transmission type is initially set to unknown when a new configuration file is created.
- Added support for selecting the primary ECU in vehicles with more than one ECU.
- Redesigned the log file format for much greater performance.
- Added support for multiple J2534-1 interfaces.
Version 1.4.0, January 13th 2006
- Added support for CAN/ISO-15765 (both 11-bit and 29-bit modes).
- Added support for SAE-J2534-1 compliant OBD-II interfaces.
- Fixed a problem with ISO-14230 bus initialization with the T16 interface.
- Fixed a bug in the OBD-II terminal where the custom send would calculate incorrect header bytes.
- Added support for the new ELM327 OBD-II interface.
- Added support for the Ozen Elektronik mOByDic interface.
- Fixed a bug that would cause the VIN not to be detected for some vehicles.
- Added support for Mode $09 CALID & CVN information.
- Support printing and print preview for the Test Results and OBD-II Terminal.
Version 1.3.0, October 8th 2005
- Fixed bug where the columns were not set correctly on a dashboard map after loading a configuration.
- When reading freeze frame data, delete any existing data before adding the new data to the grid.
- PCMSCAN now shows pending trouble codes in addition to stored trouble codes.
- Fixed printing and print preview for trouble codes.
- Fixed some WBO2 PIDs that displayed incorrect readings when viewing in English units.
- You can now enter in the T16 destination address in both hex and decimal in the preferences dialog.
- Added an OBD-II terminal where you can send custom OBD-II messages.
- Optimized the ISO/KWP keep alive message.
- Improved logging speed when using the T16 interface.
- Better handle RS232 data errors when communicating with the T16 interface.
- Added support for Continuously and Non-Continuously Monitored Tests.
- Added support for the Innovate Motorsports LM-1 Wide Band O2 Meter.
Version 1.2.22, July 28th 2005
- Fixed bug that caused some PIDs to display invalid values when in German language mode.
- Improved configuration file loading speed.
- Added MIL status section to the trouble code panel.
Version 1.2, July 18th 2005
- PCMSCAN is now available in German!
- Added parameter priority levels.
- Added the ability to set the frame number when retrieving freeze frame data.
- Added new digital gauge type.
- Added new bar gauge type.
- Added new analog meter gauge type.
- Added new default English and Metric dashboard layouts.
- Optimized the rendering of dashboard maps and tables.
- Reworked the trouble codes panel.
- PCMSCAN now scans diagnostic trouble codes much faster.
- Added ability to look up trouble code descriptions offline, without needing to connect to a vehicle.
Version 1.1.20, April 26th 2005
- Added Vehicle Model Year and Transmission Type to the Vehicle Info view.
- Increased T16 timeout.
- Added support for printing/print preview.
- Reorganized the vehicle info view.
- Added support for freeze frame data.
- By default When selecting PIDs it only shows the ones supported by the vehicle.
- Fixed the graph X-axis to always show the correct log frame number.
- Added fast forward and rewind to logging menu and toolbar.
- Fix for an occasional crash that happens when closing down the application.
- Handle the case where echo is already off when connecting with ElmScan interfaces.
- Reorganized the log file properties dialog.
Version 1.0.19, March 14th 2005
- Don't draw guage color bands if they are not in the gauge range.
- PID validation is much, much faster now.
- Enhanced the select parameter dialog to allow sorting and filtering.
- When selecting a PID in the graph settings dialog mark it to be active.
- Fixed a bug that caused the column width type in the table settings dialog to always be percent.
- Added an auto adjust increment to the axis info of a graph.
- Auto adjusted graphs are now reset when loading a new log file.
- The validate PIDs dialog now allows you to choose the validation method.
- Improved handling of BUS INIT on ElmScan interfaces.
- Improved handling of more than one OBD-II response to a request.
- PCMSCAN documentation is now available.
Version 1.0 Beta 5 Update 1, February 11th 2005
- Added a calculator tool.
- Dashboard items now get created at an offset position instead of at the same place.
- The settings dialog is now shown when you add a new dashboard item.
- Changed the copyright year to 2005.
- Changed O2 sensor PID titles to indicate the O2 sensor position.
- Fixed a problem that made new dashboard items appear behind old dashboard tables and maps.
- Removed internal parameters from the Select Parameter dialog.
- Don't count internal parameters in the total pid count, selected pid count, and supported pid count.
- Added DTC descriptions.
Version 1.0 Beta 5, February 1st 2005
- Playback speed is now configurable.
- Errors now have a description in addition to an error code.
- Added lots of new parameters.
- Fixed a bug where it would fail to connect if the Autotap (VIA LDV) reboot sequence took too long.
- Added the option to automatically connect to the vehicle at program startup.
- Added hotkeys to start, stop, and pause logging.
- The bottom of the window is now colored red or green if you are currently recording or monitoring.
- PCMSCAN is now distributed with an installer instead of just a .zip file.
Version 1.0 Beta 4, January 8th 2005
- Added two more fully customizable dashboards.
- Tables can now be placed on dashboards and customized to report any parameters you want.
- New dashboard item: Maps - maps can be placed on dashboards and customized to display a full 3D view of any parameters you wish. i.e. spark map.
- New PID selection mechanism allows greater flexibility and control of logged and monitored parameters.
Version 1.0 Beta 3, December 6th 2004
- Graphs have now been implemented.
- Added a log file export feature to export data to a .csv file for viewing in other programs like Excel.
- Fixed service ID for PID SAE.TP_B.
- When selecting a PID the names are more user-friendly.
Version 1.0 Beta 2, November 3rd 2004
- Numerous T16 and ElmScan improvements.
- ISO/KWP keep alive message timeout is now configurable.
- T16 destination address is now configurable.
- New T16 destination address detection tool.
- ElmScan OBD-II response timeout is now configurable.
Version 1.0 Beta 1, October 5th 2004
- Beta testing begins, visit the forum to apply for a beta license.
|
